Aggressive Cutting Compound


In Stock

SKU: 10-PRED-500

Product Description

Description: Formulated for use on aftermarket high solid clear coat finishes, standard OEM clears and conventional paints.  Its unique micro-abrasive system allows aggressive cutting for hard, high solid clears and commercial paints, yet is gentle enough for cutting and polishing softer coatings like OEM clear coats, enamels and lacquers. Removes heavy scratches, oxidation, orange peel and acid rain damage as well as fine wet sand scratches and minor defects. Leaves a smooth surface ready for polishing or final finishing.  Contains no wax or silicone.  Body Shop Safe.

Directions: SHAKE WELL BEFORE USING. KEEP FROM FREEZING. For your protection, safety glasses, rubber gloves, and NIOSH approved respirators and recommended while using this product. Apply a small amount of product to paint surface. Buff while wet with adequate pressure. Buff uniformly in a back and forth motion. As product dries, increase buffer speed, reduce pressure and burnish to a flossy finish. Clean pad at regular intervals.

  • AGGRESSIVE CUTTING: Use wool buffing pad. Start at 1800 rpm and increase to 200 + rpm.
  • FINE SCRATCH REMOVAL: Use foam buffing pad at 1600-1800 rpm. Optional: keep foam pad damp by regularly adding clean water from spray bottle.

Bottle: 16 oz. Flip Cap

Additional Information



There are no reviews yet, would you like to submit yours?

Be the first to review “Aggressive Cutting Compound”


+ 1 = ten